Fosroc Nitobond AR

Fosroc Nitobond AR is applied immediately after placement of the repair mortar or removal of formwork to retain moisture and ensure correct curing of Renderoc repair systems. Large areas should be cured progressively as trowelling proceeds rather than waiting for completion of the whole area. In fast drying conditions, supplementary curing with polythene sheeting taped at the edges should also be used.

When used as a surface sealer on non-trafficked cementitious surfaces, Nitobond AR is applied in two coats, the first coat diluted 1:1 with water, the second coat applied as supplied.

Typical applications, include as a curing membrane for Fosroc Renderoc repair mortars and as a dust proofer and surface sealer for non-trafficked cementitious surfaces

Benefits

• Ready to use, no mixing required
• Apply by spray, brush or medium pile roller
• Non-flammable

Good to know

• Do not use below +3°C and falling
• When used as a surface sealer on non-trafficked cementitious surfaces, Nitobond AR is applied in two coats, the first coat diluted 1:1 with water, the second coat applied as supplied.
• In fast drying conditions, supplementary curing with polythene sheeting taped at the edges should also be used.