Wykamol Ultracure Damp Proofing Cream

Wykamol Ultracure is injected by hand pressure gun into a series of holes drilled into the mortar course. Once injected, the silane cream migrates into the masonry pores and passivates across the mortar joint as it reverts from cream to liquid phase. On curing, a hydrophobic barrier is formed in situ, preventing moisture rising through the wall. The process is virtually odourless, requires no pump cleaning between jobs, and can be used in all types of masonry.

Benefits

• BBA approves - effective for at least 20 years
• Silane-based cream, migrates into masonry pores, cures to form hydrophobic barrier
• No high-pressure injection pump required
• Can be used in all types of masonry
• Virtually odourless

Good to know

• Note that walls may remain damp after DPC installation if heavily contaminated with hygroscopic salts. In these cases, replastering with a salt-resistant product is recommended
• Final cure takes 2-6 weeks depending on the thickness of the wall
• Coverage is dependent on the thickness of the wall - see the technical data sheet listed under Technical Information on the product page