Fosroc Colpor 200PF

Fosroc Colpor 200PF is designed for the sealing and maintenance of joints in concrete roads, runways and hard standings. It is particularly suited to areas where fuel or oil spillage is likely, including aircraft hard standings, oil terminals, garage forecourts, parking areas and cargo bays.

Benefits

• Cold applied - no extra equipment required
• Resistant to fuel, oil, hydraulic fluids and jet blast
• Performs across temperature extremes, does not harden in cold or soften in heat
• Elastic recovery: 94%
• Pot life: approx. 60 minutes at 20°C
• Tack free: 16–24 hours at 20°C
• Full cure: 7 days at 20°C / 3–4 days at 25°C
• Conforms to BS EN 14188-2:2004 and BS 5212 Part 1:1990
• 25% Movement Accommodation Factor

Good to know

• The two components are mixed on site using a slow speed drill and mixing paddle, then poured directly from the can or applied using a Fosroc G Gun.
• The finished sealant level must be recessed 5–8mm below the pavement surface.
• In trafficked areas, maximum expansion joint width should not exceed 30mm.
• Joint faces must be primed with Fosroc Primer 19 or Fosroc Primer 20 before application, with sealant applied between 30 minutes and 4 hours after priming.