Flowcrete Isocrete 1500 Plus 25kg

Flowcrete Isocrete 1500 Plus is a fast-drying underlayment designed for all-purpose levelling of concrete floors prior to the installation of floor coverings. Suitable for both fast-track refurbishment and new construction where floor finishes need to be applied quickly, it can be applied by hand or pump at 0–30mm depth, with a typical average thickness of 8mm on a reasonably level base. With a rapid installation rate of up to 2,000m² per day at 7mm thickness, walkable in 2–4 hours at 20°C and ready to receive moisture-sensitive floor finishes after just 24 hours (below 10mm), it is a practical and efficient choice for commercial and public building projects where programme time is critical. Protein free and free from Portland cement, it is manufactured from a combination of natural and recycled raw materials.

Benefits

• Rapid installation rate of up to 2,000m² per day at 7mm thickness under suitable conditions
• Walkable after 2–4 hours at 20°C; moisture-sensitive floor finishes can be applied after 24 hours (below 10mm)
• Hand or pump applied for flexibility across different project scales
• Protein free — will not harbour bacteria, yeast or mould
• Free from Portland cement — manufactured from natural and recycled raw materials
• Can be used as a screed to receive an epoxy resin finish in areas taking light traffic

Good to know

• Application range of 0–30mm; typical average of 8mm on a reasonably level base for pumped application
• Mix ratio of 4.5–4.8 litres of water per 25kg bag
• At 10°C, walk-on time extends to 4–8 hours — factor this into programme planning in cooler conditions
• Suitable for offices, shops, schools, hospitals, airports, prisons and other public buildings
• Not intended as a wearing surface — must be protected prior to installation of the final floor finish
• Always refer to the Flowcrete Isocrete 1500 Plus Technical Data Sheet before specifying or applying