SikaGrout-212 Fluid Non-Shrink Precision Grout 25kg

SikaGrout-212 Fluid is Sika's general purpose engineering grout, supplied as a pre-batched grey powder for consistent, reliable results on site. Once mixed, it flows freely and can be poured or pumped over long distances, spreading cleanly into confined voids, cavities and recesses without segregation or bleeding. Its shrinkage-compensated formulation holds its volume as it cures, maintaining full contact between the grout and the surrounding substrate for effective load transfer.

The grout builds high early and final strength, reaching over 45 MPa in compression at 28 days, and forms a monolithic bond to concrete, mortar and steel that resists shocks and vibration. Because it is free of chlorides and metallic particles, it will not oxidise in contact with moisture and helps protect embedded steel against corrosion. It is suitable for interior and exterior use and carries a EuroClass A1 reaction to fire rating. SikaGrout-212 Fluid meets the requirements of EN 1504-6 for the anchoring of reinforcing steel bar.

Benefits

• Non-shrink (shrinkage compensated) for full contact and reliable load transfer
• High early and final strength, over 45 MPa in compression at 28 days
• Free-flowing and self-levelling into confined voids and recesses
• Pumpable over long distances with no segregation or bleeding
• Chloride and metallic-particle free, so it will not corrode embedded steel
• Forms a monolithic bond to concrete, mortar and steel that resists shock and vibration
• EuroClass A1 reaction to fire, comparable to concrete

Good to know 

• Supplied as a 25kg bag of grey powder, ready to mix with water only
• One 25kg bag yields approximately 12.3 litres of mixed grout
• Suitable for both interior and exterior use
• CE marked with a Declaration of Performance to EN 1504-6
• Not suitable for levelling smooth or unconfined surfaces, and never as a self-levelling flooring underlayment